HDMI / RS232 over IP Extender Kit with PoE

HDMI / RS232 over IP Extender Kit with PoE

SKU: 500753

The HDMI / RS232 over IP Extender Kit with PoE allows HDMI equipment to be connected to distances up to 100m @ 1080p via single Cat5e/6 in a point-to-point configuration over a LAN infrastructure. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several encoders and decoders to the same Ethernet network. The Encoder (500753-TX) and Decoder (500753-RX) also support PoE (PD) if used with a PoE Ethernet Switch. The kit comes with one (1) Encoder and one (1) Decoder as well as an IR Emitter and IR Sensor for remote control applications. For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must have Gigabit ports, DHCP Server capability and IGMP communications protocol. We recommend using the Cisco SG300 Series Managed Switches. The MuxLab Management Software is available to simplify the configuration and utilisation of the 500753. The software can be downloaded directly from the MuxLab Web Site here.

 

  • HDMI 1.3, PoE powered

  • Supports resolutions up to 1080p

  • Supports IR, and RS232 transmission

  • Motion JPEG compression with very low latency (1 frame)

  • Transmission up to distances of 100m

  • Distances up to 120m between the TX and RX when no LAN switch is used

  • Control via Windows-based software or via any web device (mobile, tablet) with use of model 500811 Pro Digital Network Controller.

£429.98Price